What problems should be paid attention to in steel cutting
Time：[2018-5-5] Hits：4174
Steel structure gas cutting is the process of cutting steel structure with gas cutting system and tools. There are many cutting methods for steel structure, such as flame cutting, water cutting, plasma cutting, numerical control cutting and so on. Different manufacturers need to choose different cutting methods. Today, Foshan steel structure manufacturers will tell you something about steel structure gas cutting.
1. before work, check whether the equipment and tools of the gas cutting system can work normally and ensure safety.
2. the surface of steel structure can not be fouled or oil contaminated or other debris before gas cutting, leaving room for slag blowing.
3. gas cutting must be prevented from tempering.
4. the correct process parameters. Can the final result be expected
5. in order not to cause unnecessary trouble, in the operation, we should first cut the small parts, then cut the large parts. First, the complex is simple, the first is short and the later is long.
The steel structure in Foshan thinks that when the steel structure is cut, the operation procedure must be observed so as to avoid unnecessary trouble.
